Salt Bath Cleaning Filter for Cheese production

Salt bath cleaning filters for cheese production

In cheese production cheese is salted in a salt bath with a salt concentration of typically 18-20% for hard cheese and 16-18 % for soft cheese. This is to improve taste, structure and shelf life.

The average residence time in the salt bath is:

  • 3-5 days for e.g. Emmentaler
  • 1-3 days for other hard cheeses
  • Only several hours for Mozzarella

Salt bath cleaning

The salt bath needs to be cleaned from time to time because it gets contaminated by bacteria, yeast, molds, proteins and small particles of cheese. The salt bath must be very clean and hygienic to produce cheese of high quality. Cleaning the salt bath can be done by either heating or filtration. We recommend to filter the salt bath because:

  • Chemically conditioning the salt bath is not allowed.
  • UV disinfection is not successful on a large scale
  • Centrifuging will give problems due to corrosion. Spare parts for the centrifuge are very expensive.

If you clean the salt bath by heating it, you will have problems with the cheese quality because:

  • The conditions within the bath will vary.
  • Pasteurizing with heating systems will give problems due to corrosion.
  • Heating systems are very costly to operate.

Without filtration:

  • The salt diffusion is slower and less predictable.
  • The cleaning expenditure is very high.
  • Yeasts and bacteria will grow and cause quality problems and subsequent complaints.
  • The taste will vary.
  • Renewing the salt bath is very expensive and will cause loss of production.

Solution

We have made salt bath filters within a wide range, for salt baths from 60 to 4.000 m³. It is possible to filter salt bath volumes up to 8.000 m³ with just one Cricket Filter.

Salt bath cleaning filter - Cricketfilter

SBCF Cricketfilter®

A specially designed Cricketfilter® for Salt Bath Cleaning.

The SBCF is a special Cricketfilter for the conditioning of salting baths in cheese production. The Cricket Filter is a pressure filter with a large specific filtration area due to the shape of the filter elements.

The SBCF is a special Cricketfilter for the conditioning of salting baths in cheese production. The Cricket Filter is a pressure filter with a large specific filtration area due to the shape of the filter elements.

During filtration the SBCF Cricketfilter is first precoated with a suitable filter aid. This precoat layer acts as depth filter medium to remove contamination while maintaining a high filtration capacity during a long cycle time. At the end of a filtration cycle the filter is backpulsed and the cake slurry is discharged through a bottom valve.

The filter is equipped with a water sluice in the cover for improved cake removal.

salt bath cleaning filter process

System advantages SBCF Cricketfilter®

The Cricketfilter® is a closed filtration system and can be fully automated. The Cricketfilter® produces a high filtrate clarity. Elements are mounted on internal filtrate manifolds. Cake release by backpulsing with air is done for each manifold individually, which results in a more effective back pulse. During the short regeneration time the filter medium is cleaned intensively.

The filter connections are in DIN 11851-SC (dairy standard). The filter element spacing and the filter cloth are part of our expertise, and selected to suit the filtration needs of the specific application. The filters are standard equipped with a cover lift assembly. The Cricket Filter itself has no moving or rotating parts; this keeps maintenance to a minimum.

Advantages of a standard filtration process

  • Cricketfilter® to by-pass the salt bath.
  • Precoat filtration:
    1. Long cycle times, ca. 10-12 h.
    2. Shorter cycle times in the beginning due to
    existing high load in salt bath.
  • Filter aid selected according to filtration requirements between 0,1 to 10 µm
  • Wet cake discharge:
    1. Backflush into filled tank.
    2. If you backflush twice a day you lose exactly the volume that you would give up to the wastewater/day.
  • Optimize the process.

Minimizing effluent

To minimize the waste output of the process into the environment:

1. Pump the complete volume through a bag filter to the salt bath.
2. Fill the filter with water.
3. Backflush in the filter with water.

Improvements

  • Yeast particles decreased by 95 – 99 %
    • In filtrate less than 10-3.000 yeast/ml
    • In untreated bath on average up to 50.000- 1.000,000 yeast/ml
  • Average germ number goes down by 70 – 90 %.
  • Reduced moulds by more than 99%
  • You are able to change the retention with the type of precoat (for example Perlite or Cellulose)

Summary of Salt Bath Cleaning Filter for Cheese advantages

As a Salt Bath Cleaning Filter The Cricketfilter is a very flexible and advanced filter system for salt bath filtration. It has proven its performance successfully in many European cheese plants.

The plant manager can set the filtrate quality (from 0,1 to 3 µm) by selecting from many different filter aids.

  • Maintenance costs are very low
  • Life time of the filter cloth is very long.

With the control panel and (including the CIP program) the Cricketfilter units are fully automatic. The operator can automatically add filter aid to the precoat tank with a Filtration Group dosing device.

Through a CIP (Clean In Place) cleaning system in the cover of the Cricketfilter the complete filter housing can be kept clean and hygienic.

The flow rates of a Filtration Group SBCF Cricketfilter are much higher compared to the systems of others with the same filtrate quality.

Because of the higher flow in the salt bath we can increase salt adsorption by minimizing the boundary layer of the cheese. The footprint of these units is very small and the running time long, both are a major operational advantage.

The plant can increase the production volume and keep the same high hygienic level. The improved quality of the cheese stays constant.

The filtrate is as clear as water and that is the reason why you don´t need to manually clean the salt bath walls and cheese transport systems. This is beneficial for the ecology and it reduces emission costs.

The salt absorption is different between the different types of cheese and is related to the residence time of the cheese in the salt bath.

You can expect a payout time anywhere between eight months and three years based on the higher salt absorption alone. On top of that you can expect high and consistent quality, less or no re-calls, less manpower requirements and more possibilities to sell cheese with a longer shelf life.

We are here for you

We are here for you.

No query is too small for our dedicated customer service team.

Feel free to phone us or to use our easy contact form. Contact us today for a quick answer.